Merkur of Solingen Futur Safety Razor

Below is a guide to renewing a double edged blade into the Futur Safety Razor.

Step 1	Step 2	Step 3	Step 4	Step 5

• Step 1. Hold Safety Razor firmly and push up the lid.
• Step 2. Once loosened pull of the lid.
• Step 3. Very carefully place blade between index finger and thumb and insert into the Safety Razor.
• Step 4.Once blade is seated in place, then push down the lid.
• Step 5. Now set the Safety Razor for preferance. Adjustable poistions from 1-6 ( we recommend starting with position 1 )

Merkur of Solingen Vision 2000 Safety Razor

Below is a guide to renewing a double edged blade into the Vision 2000 Safety Razor and general maintenance.

Step 1	Step 2	Step 3	Step 4
Step 5	step 6	step 7	step 8

• Step 1. To open Safety Razor, turn clockwise (approx. 5 turns)
• Step 2. Insert blade
• Step 3. To close Safety Razor, turn counter-clockwise (until resistance is noticable)
• Step 4. Space between blade & edge can be set individually by memorising prefered constellation of letters -V-I-S-I-O-N-
• Step 5. Removal of the used blade
• Step 6. For thorough cleaning of Safety Razor remove blade. Press flaps against the base of the top. Turn handle counter-clockwise, until bottom lid comes off.
• Step 7. Remove bottom lid through the eccentric perforation from the groove of the guide bar, and pull it up out of the razor body with open flaps.
• Step 8. Take off the handle of Safety Razor, rinse the parts, if necessary use a lime solvent before rinsing. Insert blade only after reassembly.

.

Our Range of Safety Razors